Biarritz™ Installation Manual v.1.3 - 10
Ventilation
VENTILATION
This system is designed to be normally operated and cooled by the designed ventilation
means, allowing normal air flow beneath and around electrical and jet pump assemblies.
Additionally, each adjustable foot may be used to level the entire unit during installation.
Leveling feet also are designed to elevate the system and provide an adequate
ventilation area by providing an air gap between the bottom of the covering or skirt and
the floor (See Photo #7).
IMPORTANT NOTE:
DO NOT OBSTRUCT THE AIR GAP BETWEEN THE BOTTOM OF THE
SYSTEM AND THE FLOOR IN ANY WAY. TO DO SO MAY CAUSE
COMPONENT OVERHEATING AND DAMAGE TO YOUR EQUIPMENT.
Photo #7
1” (2.54 cm)
minimum
air gap
Product Code: LM917135
www.spaequip.com
P: 707.737.1100 F: 707.737.1150
Page 9 of 18