CA 8010 Instruction Manual
- 11 -
Safety information
The device is only designed as an alcohol breathalyzer and may only be used
for this purpose.
Batteries may not be charged or reactivated and must be kept away from
children.
Medical attention must be sought immediately if a battery is swallowed.
Only dispose of batteries at official or retail collection points
.
If you no longer want the device, please send it to your supplier. The supplier
will ensure for proper recycling/disposal.
Cleaning
Only with a soft, dry cloth. Do not use cleaning agents.
Technical information
Display:
Digital LCD display with backlight
Dimensions:
W x L x D – 54 x 114 x 18,5 mm
Weight:
approx. 75 g without battery
Batteries:
3,7 volt lithium
Measurement method: electrochemical sensor ( fuel cell )
Precision:
0,05‰ at 0.50 ‰
Measurement range: 0.10 to 4.00‰ (0.05 to 2,00 mg/L)
Temperature range:
5°C bis +50°C
Shutdown:
automatic after 30 seconds
The CA 8010 should be recalibrated every 6 months.
We reserve the right to make necessary technical and optical modifications and
improvements without serving notice.
Electrical and Electronic Equipement Act – ElektroG dated 16/03/05
Manufacturers and importers of these kinds of devices are required to dispose
of them properly in accordance with statutory provisions. This alcohol breathalyzer
is a device subject above all to the provisions under § 2/8 and 9 of this law
for wich there is no requirement to make disposal at a public disposal
site. – Your supplier would like however to comply with any future ordinances.
Should you no longer use the device – we hope after many years of faithful
serve – please return it to us so that we can dispose it
properly for you. – Thank you.
Attachment / RoHS
