background image

− 23 −

Warranty

New Cosmos Gas Detection Product Warranty

New Cosmos Electric Company Limited (New Cosmos) offers the following as the sole and exclusive 
limited warranty available to Customer.
This warranty is in lieu of, and customer waives, all other warranties of any kind or nature, expressed or 
implied, including without limitation, any warranty for merchantability or fitness for a particular purpose. 
The remedies set forth herein are exclusive.

New Cosmos warrants to the original purchaser and no other person or entity (customer) that gas 
detection product supplied by New Cosmos shall be free from defects in materials and workmanship for 
a period of one (1) year from the date of purchase. This warranty does not include consumables, such 
as fuses, filters, etc. Certain other accessories not specifically listed here may have different warranty 
periods.

After examination of allegedly defective product return to New Cosmos, with freight prepaid, should the 
product fail to conform to this warranty, customer’s only remedy and New Cosmos’s only obligation shall 
be, at New Cosmos’s sole option, replacement or repair of such non-conforming product or refund of 
the original purchase price of the non-conforming product. In no event will New Cosmos be liable for any 
other special, incidental or consequential damages or losses of any kind whatsoever, including but not 
limited to, loss of anticipated profits and any other loss caused by reason of non-operation of the product.

This warranty is valid only if the product is maintained and used in accordance with New Cosmos’s 
instructions and /or recommendations. New Cosmos shall be released from all obligations under this 
warranty in the event repairs or modifications are made by persons other than its own or authorized 
service personnel or if the warranty claim results from physical abuse or misuse of the product.

Request for maintenance

The instrument is a precision instrument. To keep its accuracy, request your New-Cosmos Electric 
representative for a periodical check at least once a year in addition to daily maintenance. If there is 
any point which is not clear concerning dally maintenance, please
do not hesitate to ask us our agent.

Concerning the repairing of the instrument, please contact our agent. (The cost for sending the 
instrument to agent will be borne by the customer.)

8. Warranty

Summary of Contents for XP-3110

































Reviews: