background image

 

- 19 - 

 

8. Warranty 

 

 

New Cosmos Electric Company Limited (New Cosmos) offers the following as the sole and 

exclusive limited warranty available to Customer. 

This warranty is in lieu of, and customer waives, all other warranties of any kind or nature, 

expressed or implied, including without limitation, any warranty for merchantability or 

fitness for a particular purpose. The remedies set forth herein are exclusive. 

 

New Cosmos warrants to the original purchaser and no other person or entity (customer) 

that gas detection product supplied by New Cosmos shall be free from defects in materials 

and workmanship for a period of one (1) year from the date of purchase. This warranty 

does not include consumables, such as fuses, filters, etc. Certain other accessories not 

specifically listed here may have different warranty periods.   

 

After examination of allegedly defective product return to New Cosmos, with freight prepaid, 

should the product fail to conform to this warranty, customer’s only remedy and New 

Cosmos’s only obligation shall be, at New Cosmos’s sole option, replacement or repair of 

such non-conforming product or refund of the original purchase price of the 

non-conforming product. In no event will New Cosmos be liable for any other special, 

incidental or consequential damages or losses of any kind whatsoever, including but not 

limited to, loss of anticipated profits and any other loss caused by reason of non-operation 

of the product. 

 

This warranty is valid only if the product is maintained and used in accordance with New 

Cosmos’s instructions and /or recommendations. New Cosmos shall be released from all 

obligations under this warranty in the event repairs or modifications are made by persons 

other than its own or authorized service personnel or if the warranty claim results from 

physical abuse or misuse of the product. 

 

 

- 18 - 

 

7. Troubleshooting 

 

 

Check for the items in the following table before requesting repair work. 

 

* If operation is impossible, try again after removing all of the batteries for a few 

minutes and insert them again. 

 

■ 

Gas Leak Detector 

 

Problem Cause  Action  Reference 

The power will not turn 

ON by pressing the 

POWER/SENSITIVITY 

button. 

The battery polarity is 

reversed. 

Insert the batteries 

correctly. 

Battery Replacement 

on page 15 

Battery exhaustion. 

Replace the batteries. 

Displaying the error. 

Refer to 

Error Displays

Error Displays

 on page 

13 

The buzzer will not 

sound. 

The Gas Leak Detector 

is in silent mode. 

Release silent mode. 

Silent Mode

 on page 

11 

The alarm buzzer is 

turned OFF. 

Turn ON the alarm buzzer. 

Deactivating the Alarm 

Buzzer

 on page 12 

 

 

Summary of Contents for XP-703D III

























Reviews: