Cosori CP530-VS, User Manual

7

USING YOUR VACUUM SEALER

Making a Vacuum Bag

1. 

Open the lid. Place the bag roll in the roll 
storage at the back of the vacuum sealer. 

2. 

Lift the blade rack and pull the end of the 
bag roll through. Place the blade rack over 
the roll. 

3. 

Pull out the desired length of the bag, and 
use the sliding blade to cut it out. [

Figure 1.1

] 

Remove the bag roll.

4. 

Place one end of your bag onto the sealing 
strip, then close the lid. [

Figure 1.2

] Press 

down on both corners of the lid to lock. 
[

Figure 1.3

] You should hear a click from 

each corner. 

5. 

Press 

Manual Seal 

to seal the bag. The 

Manual Seal

 indicator light will turn on 

during sealing.

Figure 1.2

Figure 1.3

Figure 1.1

NOTE:

• 

Always

 wait at least 20 seconds between 

sealing bags. 

NOTE:

• 

Do not

 unlock the lid until the 

Manual Seal 

indicator light turns off, even if the vacuum sealer 

has finished sealing.

NOTE:

• 

The included bag roll is 8 in x 16.4 ft  

(20 cm x 5 m).

• 

This vacuum sealer is compatible with most 8 

in (20 cm) and 11 in (28 cm) vacuum sealer bags 

and bag rolls. 

slide to cut

Click!

Click!

6. 

When the light turns off, press the release 
buttons on both sides of the vacuum sealer 
to unlock the lid.