Cee® Apogee™ Developer Manual
Page
10
of
15
3.2. Facilities Requirements
The Apogee
™ Developer requires the following utilities for operation. Locations for connections
are shown in the figure below.
1. USB Port
– Used to update the software or download log files (see DataStream™ Manual)
2. Programmable Exhaust (Optional)
– Communication port for optional Programable Exhaust module
3. Light Tree (Optional)
– Port for optional light tree
4. Backside Rinse (BSR) (Optional)
–
Fitting for dispense material for optional Backside Rinse
5. Spin Bowl Exhaust Port
– Exhaust port for spin bowl vapors. Port is 1 Inch OD and 50 CFM of
exhaust is recommended
6. Fuses
– System protection fuses
7. System Vacuum
– System vacuum for vacuum chuck. Recommended vacuum Supply is 20 in Hg at
a flow of 5
l/min. Port is ¼” barb fitting
8. Dispense Trigger
– This port us used to connect to the optional dispense control box. This is used
when using automated dispenses
9. Accessory Port
– This is used to talked to external I/O device to support extra outputs and inputs.
10. Ethernet
– The ethernet can be used for remote recipe writing and remote control (see
DataStream™ Manual)
11. Spin Bowl Drain
– The port that removes the liquid waste from the machine. The port is ¾” OD.
12. AC Power In
– Cord is Provided. Single Phase 100-120V AC at 10 Amps (208-240V A/C option
available, see back label shown in Figure 1 to verify)
1
2
3
4
6
7
8
9
10
11
12
5