Part 3 - Configuration
57
Device Setup
Refer to the
for basic
information on using the Setup menus.
Alarm-Out
Select the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
•
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
•
Title
: Designate a name for the alarm-out.
•
Range
: Change the schedule time frame.
•
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
•
Channels
: Configure alarm-out port and beep
settings.
Display Setup
Refer to the
for basic
information on using the Setup menus.
OSD
Show OSD (On Screen Display) information on the
bottom of the screen.
Status
•
Date
and
Time
: Displays the date and time.
•
Remote Control
: Displays remote control receptivity.
•
Free Space
: Displays whether or not the NVR is in
the recycle mode, and displays the available storage
space when not in the recycle mode.
•
User Name
: Displays the current user logged in.
•
Background Panel
: Displays background panel at the
bottom of the screen in black.
Camera
•
No.
: Displays the camera number on the upper left
corner of the camera screen.
•
Title
: Displays the camera name on the upper left
corner of the camera screen.
•
Record
: Displays recording and schedule icons.
•
Audio
: Displays the
icon on channels generating
audio.
•
PTZ
: Displays the
icon on PTZ cameras.
•
PTZ Zoom
: Displays the zoom magnification (e.g. x2,
x3, etc.)
