4-Channel Digital Video Recorder
15
You can set up holidays by highlighting
+
and pressing the
button. The current date appears.
Highlight the month and day and change them by using the
Up
and
Down
arrow buttons. Press the button to add the
date. Dates can be deleted by highlighting the beside the
date and pressing the button.
NOTE: Holidays that do not fall on the same date each
year should be updated once the current year’s
holiday has passed.
Figure 11 — Holiday setup screen.
Highlighting the
Time Sync.
tab causes the Time Sync. screen to display. You can set up time synchronization between
the DVR and standard time servers that are available in most time zones and countries, or between the DVR and another
DVR.
Figure 12 — Time Sync. screen.
Highlight the box beside
Automatic Sync.
and press the
button. This toggles between
On
and
Off
.
Highlight the box beside
Time Server
and press the button.
A virtual keyboard appears that you can use to enter the IP
address or domain name of the time server. Highlighting
allows you to select your time server from a list of registered
time servers.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
Highlight the box beside
Interval
and press the button.
Set the time interval for synchronization from 30 minutes to
1 day at various time intervals.
Last Sync-Time
displays the last time the DVR was synchronized with the time server.
Highlight
Run as Server
and press the button. Pressing the button toggles between
On
and
Off
. When it is
On
, the DVR you are setting up will run as a time server.
Storage
Highlight
Storage
in the System menu and press the button. The
Storage
setup screen appears and displays
information about the DVR’s storage devices.
The information in the
Type
column describes the storage
device.
The capacity of the storage device is displayed in the
Capacity
column.
The
Format
column displays whether the device is used for
recording (
Record
) or not (
Not Using
).
Not formatted
indicates the device is not formatted. indicates when the
device has temporary space set aside so that video clips can
be saved on a DVD RW.
Figure 13 — Storage Information screen.
Summary of Contents for 4 Channel
