4-Channel Digital Video Recorder
21
DVRNS Setup
DVRNS Server:
Enter the IP address or domain name of
the DVRNS server.
Port:
Set the port number of the DVRNS server.
Use NAT:
Select the box to use the NAT (Network Address
Translation) device.
DVR Name:
Enter the DVR name to be registered on the
DVRNS server.
Check:
Select the box to check whether or not the name
you entered can be used.
NOTE: The DVR name you entered should be checked by
selecting Check, otherwise the DVRNS changes will
not be saved.
NOTE:
When entering no name or a name already registered
on the DVRNS server, an error message displays.
Select the
Finish
button to finish the Setup Wizard.
Shutdown
Highlight
Shutdown
in the System menu and press the button. The
Shutdown
screen displays asking you to confirm
whether or not you want to shut the system down.
After selecting
Shutdown
and pressing the button, a screen will appear telling
you when it is safe to disconnect power.
Figure 19 — Shutdown screen.
Network Setup
Figure 20 — Network menu.
Network
Highlight
Network
in the Network menu and press the button. The
Network
setup screen displays.
Summary of Contents for 4 Channel
