45
Contera Outdoor Dome | Installation Manual
Event
Menu
Feature
Description
Enable
Turns on and off on-camera motion detection
Extend
Enables the extended motion detection and motion
detection zones increase from default 64 to 1024 for
enhanced motion detection sensitivity.
Zone Size
Adjusts the size of motion detection zones.
Detail
Sets the size of each zone displayed by the motion
detection grid contains sub zones the number of which
is set by the zone size setting up to 32x32 (pixels). This
setting configures the sensitivity of the motion
detection to the size of objects in the image moving
through the zone. Higher values will trigger motion only
for larger objects moving through the zone, lower
values will cause detection of smaller objects in the
zone (increasing sensitivity to smaller size objects
moving through the image).
Level Threshold
Sets the sensitivity to brightness changes between
dark and light objects within each grid zone. As an
example “Detail” will set the size of the object detected
within the zone, “level” sets the duration that
movement must be maintained to trigger motion
detection. Lower settings can increase false motion
alarms caused by image noise, higher settings will
require more movement to trigger a motion event.
Motion Sensitivity
Sets the sensitivity to sudden overall brightness
changes in the image.
*This function is supported
depends on models.
Enable Alarm Detection
Enables Alarm Detection (Alarm In) function.
