18
Part 2 - Getting Started
While in the PTZ Tools window, select the
icon to display the
Move to Preset
window. Select a preset to move the current
PTZ camera to the selected preset’s position.
Advanced Settings
In PTZ mode, selecting a camera and then right-clicking on the
right
loads the Advanced PTZ screen as shown below. This menu
lists
Speed
,
Auto Pan
, and other advanced PTZ camera control
options available for the camera. Options that are not available for
the selected PTZ camera remain inactive.
You can use the mouse to control PTZ cameras. Left-click
on the mouse and drag to move the camera in the desired
direction and use the mouse wheel to zoom in/out.
PTZ Camera Pan and Tilt
Zoom In/Out
Focus Near / Far
IRIS Open / Close
One Push
Set / Move to Preset
Advanced PTZ
•
While in one push, the message “Focusing...” will prompt
on the screen.
•
Drag and drop to reposition the PTZ Tools window.
•
Select the
icon to hide the PTZ Tools window.
Event Monitoring
When an event occurs, the video decoder automatically displays
the channel linked to the event and shows the
icon on the
system status area on the upper right portion of the screen. To use
the Event Monitoring feature, navigate to
Display > Monitor
and enable
Event Monitoring
. Event Monitoring remains in
effect throughout the entire
Event Monitoring Time
. After
that, the video decoder will return to the previous screen if a new
event does not take place. Pressing the
Layout
or a
Camera
button before the end of the
Event Monitoring Time
reverts
the system to Live mode.
