User Manual
64
4.5.2
Main Stream
To set the image resolution when event occurs across channels or general recording is in
process.
Main Stream > Analog Camera
To set the image quality and resolution of Main Stream
Figure 4-34 RECORD > Stream > Main Stream
Table 4-36 RECORD > Stream > Main Stream Item and Description
No.
Name
Function
1
CH
Display channels.
2
Resolution
Set the resolution of video clips (4MP, 1080P, 720P, and 960H).
3
Continuous
Select recording FPS and image quality in consecutive recording.
▪
Frame Rate: recording FPS selection (1-30)
▪
Quality: recording image quality selection (Level 1-8)
4
Event
Select recording FPS and image quality in event recording.
▪
Frame Rate: recording FPS selection (1-30)
▪
Quality: recording image quality selection (Level 1-8)
5
Pre-Alarm
Start recording before set time, if event occurs
(null, 1 sec, 2 sec, 3 sec, 4 sec, and 5 sec).
6
Post-Alarm
Recording after set time until event ends
(null, 5 sec, 10 sec, 30 sec, 1 min, 5 min, and 10 min).
7
Copy Stream
Setup
Copy main recording image set value to other channels.
