User’s Manual
10
NOTE:
Ask the administrator of the video input device for the camera connection information (User
ID/Password and IP Address/Port).
Display
Video Format
: Choose the video format.
Video Output
: Choose the video output mode
(
Automatic
or
VGA
). Selecting
Automatic
detects a
connected monitor automatically. When the VGA
monitor does not support the auto detect function, select
VGA
to change the video output mode manually.
OSD
−
Status / Camera:
Select OSD items to display on a
monitor.
−
OSD Transparency / Margin
: Adjust the transparency
and margins of OSD information to display on a monitor.
NOTE:
The OSD information that can be set up includes:
–
Network
: The icon is displayed when the unit is connected to a network via Ethernet.
–
Freeze & Sequence
: The icon is displayed while in the freeze mode.
–
No
. /
Title
: The number and title of the connected camera are displayed.
–
Event
: Event icons are displayed when the events are detected. ( : Motion detection, : Alarm-in,
NO VIDEO
:
Video loss,
BLIND VIDEO
: Video blind)
–
PTZ
: The
icon is displayed when the connected camera is a PTZ camera.
–
Audio
: The (speaker) or (microphone) icon is displayed when audio out or audio in is enabled.
–
Date
/
Time
: Date and time of the connected camera are displayed.
3.5 Device
You can set up audio in/out and RS485 port information.
Audio
Audio In
: Check the box to enable audio in and select
the proper audio-in type. You can also adjust the volume.
Audio Out
: Check the box to enable audio out. You
can also adjust the volume.
NOTE:
The receiver does not have amplified audio output,
so you need to use a speaker with an amplifier.
Summary of Contents for CR1000INR
Page 1: ......
Page 2: ......
Page 6: ...User s Manual iv ...