User’s Manual
10
Date/Time
Date
/
Time
: Change the system date/time, date/time
format and time zone and turn daylight saving time on
or off by checking the box. Clicking the
Apply
button
applies the changes immediately.
Time Sync
−
Automatic Sync
: Check the box to automatically
synchronize the time with a time server. Enter the IP
address or the domain name of the time server and set
the time interval for synchronization. If the time server
uses the DVRNS function, selecting the
Use DVRNS
box allows you to enter the name instead of the IP address
or the domain name of the time server.
−
Run as Server
: Check the box to run the transmitter
as a time server.
NOTE:
If you want to use a domain name instead of the IP address of the time server, the DNS server
must be set up properly during the
Network – IP Address
setup. If you want to use a name instead of
the IP address or the domain name of the time server, the DVRNS function must be set up properly
during the
Network – DVRNS
setup.
User/Group
User/Group
: Click the buttons to change the settings
for a group or a user allowed controlling the transmitter
remotely.
−
Add Group
: Click to add a group. Enter the desired
group name and set authority levels for the group to
control the transmitter remotely.
−
Add User
: Click to add a user. Enter the desired user
name and select the group that the user will belong to.
Enter a password to be assigned to the user.
−
Change
: Select a group and click the button to change
authority levels assigned to the group, or select a user
and click the button to change the user’s password.
−
Delete
: Select a group or user and click the button to
delete the group or user.
Allow Anonymous Login
: Check the box to use the webcasting feature. Refer to
3.4 Video –
Webcasting
for details.
Allow Anonymous PTZ Control
: Check the box to allow remote control of a PTZ camera on a
website by using the webcasting feature.
NOTES:
The
User/Group
changes are permitted only to the users in the
Administrator
group.
There is no default password for the
admin
user in the
Administrator
group.
The authority levels that can be assigned are:
– Upgrade: The user can upgrade the software.
– Setup: The user can set up the system.
– Color Control: The user can control brightness, contrast, hue and saturation for cameras.
– PTZ Control: The user can control a PTZ camera.
