6
www.costway.com
DO NOT pump to a high pressure and let the board sit out in the hot sun. if
the board is going to be in a warm environment, slightly deflate the board and
allow the heat from the sun to increase the internal pressure. When paddling,
the lower temperature of the water may cause a slight loss in chamber pressure.
It is a good idea to carry a pump with you so that you can add some air to the
chambers if necessary.
ALU telescopic ISUP paddle
Your board paddle comes in three pieces. To build the paddle, hold the button in
while sliding the pieces together until they click into place. The last section(top)
of the paddle is adjustable.To find the ideal height for your paddle, start by
building the paddle so it is 6 inches taller than your own height. From this point,
adjust the top section up or down until the length is comfortable for you. a longer
paddle is better suited for a smooth, easier paddling motion. A shorter paddle is
good for performance or competition riding.
After closing the button, if you find that the adjustable section is a little loose,
please tighten the screw properly with a screwdriver.
Features:
Adjustable length from 160-210cm
Light and FLOATING, 960g
Shaft of 29 and 27mm in alloy 6005-T6
Compact: removable in 3 parts of 79cm
