Fig.3
Button
M6*40mm
1
2
3
4
Fig.13
Fig.2
Press the button to release the
front wheel, then fold until the pin
inserts in the hole as Fig.8 and 9.
Move the slide lock
downside and lock to
upper bracket as Fig.2.
Lift the handle to level
position as Fig.1.
Fig.1
Fig.12
Fig.14
Adjustable handle
with 4 positions
height as Fig.13.
Press the red button
and adjust the slide
lock to required handle
height as Fig.12.
Fig.9
Fig.7
Fig.4
Fig.5
Fig.10
Press the button on the wheel
lock mechanism to assembly
rear wheel as Fig.3.
Fig.11 shows the
folded position.
Assembly the seat as Fig.6.
Fig.6
Fig.11
Move the slide lock
up to release the
handle as Fig.10.
Assembly front wheel set into the lower frame by 1pc M6*40mm screw
and nut as Fig.4,then rotate until the pin inserts in the hole as Fig.5.
Umbrella Holder
Assembly
To Put In Use:
Simply attach the umbrella
holder onto the cart in fig. 15.
Foot Brake
Mechanism
Slide Lock Mechanism
Folding Steps
Assembly Details
Pin
Hole
hole
button
Fig.15
Fig.8
Release the seat
as Fig.7.
Push on the brake pedal to
stop the rear wheel and pull
off to release as Fig.14.
