5
Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendations
Permanent Shopping Cart
Order History
We would like to extend our heartfelt thanks to
all of our customers for taking time to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
4
www.costway.com
Patching Instructions:
Needle eye repair
1. After the bed is deflated, cover the nozzle and reduce the gas
flow in the bed.
2. Take out the glue in the repair kit and add a drop of glue to the needle eye to complete the
repair Wait for four hours before refilling.
3.Ifthe needle eye is large, take a toothpick, apply the glue on thettip of the toothpick, apply it
to the damaged area and fill the needle eye with glue.
4. After the repair is completed, wait for four hours before refilling.
Repair scratches and burns
1. After the bed is deflated, cover the nozzle and reduce the gas
flow in the bed.
2. Find the patch material in the repair kit and cut a piece that needs to fully cover the broken
seam.
3. Apply the glue to the damaged area, press the patch, and glue the edges of the patch.
4.Apply pressure to ensure there are no gaps on the rubber surface and press it with smooth,
heavy objects.
5. Wait for elght hours before inflating and repair is completed.
Flocking surface repair
1. Carefully clean the repair area.
2. After drying, remove the patch, cut it and cover it over the damaged surface to allow the
patch to be a little more than the surrounding leather
3. Apply alayer of glue to the patch and the damaged surface, and glue the edges of the patch
to ensure a complete seal.
4. squeeze it with a smooth, heavy object.
5. Press it with heavy objects for 24 hours, then inflate and the repair is completed.
