ASSEMBLY CONTENTS
CHECK WHAT YOU HAVE RECEIVED ...
You have received 1 box. Please check the contents of the box against the list below.
If anything is missing, please contact us.
ASSEMBLY / OPERATING INSTRUCTIONS
BOTTOM SHELF ASSEMBLY
SUPPLIED LOOS IN BOX
1x top assembly
1x bottom shelf
6 x screws
1x screw driver
2x leg sets
1.Unfold the leg sets,and connect the bottom shelf to the four legs with screws.
Note: Put the side with Letter sticker A,B,C,D outside,and connect the legs A and D to
to the short shelf tube,and connect the legs B and C to the long shelf tube.
2.Connect the top assembly with the leg sets.
Note:fold the leg sets before connecting,and connect the leg tube A to A,B to B,
C to C,D to D.
Fold it first
1 x shelf tube
ASSEMBLY / OPERATING INSTRUCTIONS
ACCESSORY TRAY HOLDER
1. Place the secondary lock down
2.
Ensure that accessory tray holder frame is locked correctly by
STORING YOUR CHANGE TABLE
1. Pull safety locks forward
2. Lift the frame safety locks
3. Close frame
on both sides of the frame.
on accessory tray and lift upwards
CLEANING
To ensure the long-lasting use of your changing table, dry it with a soft absorbent cloth after use.
Use a damp cloth to clean the frame. Do not use abrasive cleaners. Allow it to dry thoroughly. Re-
movable and non-removable farbic covers and trims maybe cleaned using a damp cloth with soap
or mild detergent. Allow it dry completely before folding or storing it away. Do not dry clean, or use
bleach on fabrics or trims. Do not machine wash, tumble or spin dry, unless the care labelling on
the prosuct permits these methods
MAINTENANCE
Check changing table regularly to ensure that locking devices and components are secure and
working properly. Always check parts regularly for tightness of screws, nuts and other fasteners –
tighten or replace if required. To maintain the safety of your changing table, seek prompt repairs for
bent, torn, worn or broken parts. Use only those parts and accessories approved by us. To prevent
mould or mildew, do not fold or store the product if it is damp or wet. Allow it to dry thoroughly.
Always store the product in a well ventilated area and away from direct sunlight.
3.Unfold the legs after finishing assembling.
Ensure that the accessory tray holder frame is locked
correctly by pulling upwards and ensuring it does not lift.
Connect the shelf tube to the middle of the tray hole if
it's neccessary.
