Safety Instructions
Before operating the unit, please read this manual and keep for later use.
The projector in the design process is to take a variety of security measures, but improper use may
result in electric shock or fire.
Ensure the safety of the projector installation, use and repair, please observe the following basic
requirements
1. Using environment
Do not use the unit in the humid environment . For example:near a bathtub,sink, laundry tub, or wet
basement, or near a swimming pool.
2. Accessories
Don't use Accessories not recommended by the manufacturer of this product,Otherwise may be
dangerous
。
3. Cleaning
Before cleaning, set the machine's power cord from the power and wipe the casing using a damp cloth
4. Installation and fix
Do not place the unit in unstable bracket, or table to prevent the projector to fall, causing serious injury
to a child or adult.And the projector body itself is severely damaged,.The installation of the machine in
any way must be comply with manufacturer's instructions, and use a mounting accessory
recommended by the manufacturer.
5.Ventilation
The gap on the body with holes is to ensure ventilation. To make sure projector reliable operation, do
not place the projector on a bed, sofa, rug or other similar items, so that these vents are covered or
blockage
6.Power supply
The machine can only use the bottom labels which stipulated the type of power
7. Ground wire or Polarization
Ground wire in the power cord of the projector needs to be grounded , be sure to put the power cord
access in conformity with the provisions of the national distribution power system
8. Protecting the power cord
Power cord should not be placed on vulnerable pedestrians trample or easily pinched ,please specially
attention to the wire of power plug or power outlet .
1
