5
www.costway.com
4
www.costway.com
• Place stably: The floor or car surface on which the refrigerator will be placed must be flat
and firm.When the refrigerator is placed in the car, pull belts should be pulled into box body
fixed position to fix the refrigerator firmly.
The installation of 12V/24V dc power supply on board must be operated by a professional
electrician.
• When charging batteries, it is necessary to ensure that refrigerator have been disconnected
from power supply.
•
• Ensure that the product is connected to the correct voltage at all times. The parameters at
the bottom of the product are labeled with approved voltage parameters.
• Do not use electrical products inside the refrigerator.
• Avoid moisture: The refrigerator should avoid excessive moisture to reduce the chance of
metal parts rusting. Rinsing it with water will cause poor insulation, lead to leakage or out of
order.
3.Function Description And Operation Method
LCD
display
+
<
>
<
-
°
C
M
AX
—
Increase
Decrease
Set
Power
ON
/
OFF
-
26
• ON/OFF: Long press the button for 3 seconds, the refrigerator gets into startup/standby
mode.
Note: Shut down and start up again, the compressor has a 3-minute delay protection.
• Temperature control: Press or to adjust the setting temperature, that it changes
and memorizes accordingly. Stop operation, the panel will flash for 5 seconds and display the
temperature inside the refrigerator.
<
>
• Short press button, it flashes
℃
. Loop click button, it flashes , V-,V V circularly
in turn, and enters the temperature unit and compressor speed setting state. After the
corresponding parameter flashing stops, the refrigerator saves the parameter settings.
-
-
--
-
Parameter Function
：
℃:
Celsius degree
;
:
Fahrenheit degree
;
ECO:Energy saving mode(compressor speed 3000R/min)
MAX:
℉
<
-
<
--
<
--
-
Fast cooling mode(compressor speed 2000R/min)
:
Battery voltage protection-Low
:
Battery voltage protection-Mid
Battery voltage protection-High
Note:The voltage level is testing the voltage value of input terminal of the
compressor not the output terminal of the car battery
:
11.7±0.3V
10.7±0.3V
10.2
±
0
.
3V
12.7±0.3V
11.7±0.3V
11.2±0.3V
24.6±0.3V
22.6±0.3V
21.6±0.3V
26.0±0
.
3V
24.0±0
.
3V
23.0±0.3V
<
-
<
--
<
--
-
Battery voltage
protection
12V cut out
12V cut in
24V cut out
24V cut in
• There are 3 minutes time delay to protect the compressor,which means after the
refrigerator turned on,the compressor will not work at once,it will start to work after 3 minutes.
And at this time, the cabinet temperature in the fridge > the setting tempe3C),and
turned on.When the cabinet temperature in the fridge = the setting temperature,
compressor stop working.
• To protect the compressor,it will restart to work again after at least 3 minutes.
• Power memory function:After restart,the temperature set will be as same as the one you
set before power off.
4.Simple Fault Analysis
• The refrigerator does not work
—Check if the power supply is connected correctly (whether the plug is loose, whether the
positive and negative poles are connected incorrectly)
—Check if the ventilation and ventilation conditions are normal.
—Check if the fuse is blown
—Check if the power switch on the control panel is turned on.
℃ ℉
