PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
缺水
电源
时间
滚动
调温
缺
水
电
源
时
间
滚
动
调
温
Clean
Use cloth to wipe
the product body
缺水
电源
时间
滚动
调温
Clean the power cord set
• Clean once a month.
• Unplug the power plug from the household
power outle
t, and wipe off du
st, etc.
with a dry cloth.
Clean the inside of the product
• Clean once a month.
• In order to remove and prevent scale deposits, the appliance should be
according to the following steps.
Wipe the water from the body and water tank.
This will not cause hygiene problems because the water will be boiled
Clean the product body
Do not wash or soak the product body in water.
• Use a cloth dampened with soapy water to wipe the product body.
• Never use alcohol, thinner, benzine or nail polish remover. Those material
Do not flush the body
directly with water
product to drain water
Sp
ecific
What if the
sealing ring of the water tank cap is off
Name
Steam Foot Spa Massager
Model
EP24834
Rated Voltage
110V~
6
0Hz
Rated Power
450
W
Timer
10/20 min
Steam Temperature appr. 45°C (113
℉
)
This product is only for home use.
1. Put the sealing column into the spring,
and push the inde
x fin
ger into the central
part of the wat
er filling
cap.
2. Gently press the outer edge of the
water-
filling
c
ap seal(A), find the
recessed
hole under the water-
filling seal ring(B),
insert the seal ring to make the recessed
holes match.
12
13
