www.costway.com
Common malfunction and solution
Other malfunctions and solutions
1.No display
a:Check whether the power is plugged in and turned on correctly,
whether the fuse of the control device is blown;
b:Whether the 4core line of control panel and display is connected
correctly;
c:Whether the control and transformer are intact.
2.Motor does not work
a:Please check all the wires are connected well;
b:Please check the error code displayed on the electrical head;
Whether your hand contact the sensor close enough
3.Touch screen is insensitive:
a:whether the touch screen is moist.
b:Whether sweat in on your hands
Malfunction
Cause
Solution
Treadmill can
not work
Unplug
Plug the power cord
No embedded security key
Insert the safety key into the panel
Signal wire or power supply
broken
Check signal wire
Switch is off
Turn switch on
Running belt
dose not move
smoothly
Not enough lubricating
Lubricate with silicone oil
Running belt is too tight
Adjust the tightness of the running belt
E01
No Signal
Check whether the connecting line
between PCB and control panel is
good.
E02
Wires of motor is not connecting
well.
Check whether the power cord of the
motor is well connected
E05
The product is over current
Turn off the product and reboot can
solve this malfunction.
E07
The emergency stop device is
disconnected
Please put the emergency stop device
to the yellow mark on the control panel.
Welcome to visit our website and purchase our quality products!
We would like to extend our hear�elt thanks to
all of our customers for taking �me to assemble
this product and giving us valuable feedbacks.
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
Reward Points
Exclusive Customer Service
Personalized Recommenda�ons
Permanent Shopping Cart
Order History
www.costway.com
20
21
