www.costway.com
www.costway.com
Assembly Guidance
How to assemble the supporting tube
Step 1
Take the product out from the carton, then take off the PE bag and
lay it on the flat ground.
Step 2
Lift up the support tube and move it to the correct position (as
shown in the picture), and then use a 6# Allen key to lock the tube
in the middle of the tube cover in a clockwise direction (the other
side is the same). If the support tube does not shake, it means the
installation is ok.
Step 3
Turn the handles down to the horizontal position, then take out the
locking knob from the spare parts to lock the electrical head.
Step 4
Place the emergency stop device in the middle of the yellow area,
and hang the emergency key under the electric head, and insert
the phone holder to the electrical head((as shown in the picture).
10
11
