www.costway.com
www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
US: cs.us@costway.com
UK: cs.uk@costway.com
Before You Start
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
Please note that all bolts must be locked after all parts are screwed on and installed
according to the following requirements.
Attention
First Step:
(1)Open the carton, remove the above parts
from the carton, and lay the main frame flat
on the ground.
(2)Using an open wrench, with half round
head square neck bolt (262) with washer
(257) and cap nut (263), to lock the front
foot tube (24) and the rear foot tube on the
main frame (255) respectively.
Second Step:
(1)Insert the cushion lifting tube (40) into the
main frame (255). Screw on the drawing
knob(58).
(2)Lock the cushion (42) onto the cushion
soleplate (63) and lock it onto the cushion
lifting pipe (40) with knob (268).
(3)Lock the left ‘L’ and right ‘R’ pedals
respectively on the main frame (255). (Pay
attention to the left and right, and then
tighten in thread direction)
Third step:
(1)Insert the handlebar lifting tube (29) into
the main frame (255). Screw on the drawing
knob (58).
(2)Install the handlebar (32) on the
handlebar lifting pipe (29) with bolts (259),
spring washer (258) and flat washer (257).
(3)Install the electronic meter (264) on the
electronic meter base (265) and lock it on
the handlebars with bolts (266).
02
03
