Override Key & first time to open the safe with override
key:
For your convenience, this wall safe is engineered a manual override
system in this product. lf you forget or misplace your code or the
batteries die, you can still access your valuables. The safe serial
number is near the override lock factory can make a copy of your key
by this number. If you lose your key, please contact us.
You will need to do the following to find a lock and use the override
key to open the safe:
Remove small screw by counter-clockwise on the electronic lock.
Remove small cover that holds the keypad .
Insert your key and turn it counter clockwise. Turn the knob
clockwise, the door will open. After opening the safe, please set up
the keypad and screw.
04
05
Open the safe
A. Input your code(factory default code:159), then press the
"B"button, the green light will turn on.
B. Turn the knob clockwise within 5 seconds, the door is opened.
C. Each key being pressed is indicated with a buzzer and a yellow
flashing light.
If the entered code is invalid, then the yellow light will flash and
the buzzer will quickly beep and the user should enter the correct
once again.
Battery Replacement:
A red light on the control panel indicates low batteries. At this point,
there is still enough power to open the safe a few more times. Once
you see the red light, the batteries should be changed immediately!
To replace the batteries, open the sliding cover on the back of the
door and replace the battery. Use AA battery only.
CAUTION:
Entering an incorrect code 3 times will freeze the system
for 20 seconds.
Close the safe
Turn the knob counter-clockwise, the mechanism will automatically
lock the safe.
Do not keep the key in your safe.
In the event of battery failure, you will not be able to open the safe.
1
2
3
4
5
6
7
8
9
A
0
B
Small screw
Small cover
Override key lock under the small cover
Decorative Part
Knob
Keyboard
