5
www.costway.com
4
www.costway.com
STEP 1
A. PLACE RIGHT ARM (A) UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE.
B. ATTACH SEAT (D) TO RIGHT ARM (A) WITH FLAT WASHER (K)
AND SHORT BOLT (G) USING ALLEN WRENCH (L). DO NOT
TIGHTEN COMPLETELY.
C. ATTACH LEFT ARM (B) TO SEAT (D) WITH FLAT WASHER (K)
AND SHORT BOLT (G) USING ALLEN WRENCH (L). DO NOT
TIGHTEN COMPLETELY.
STEP 2
A. TURN SEAT ASSEMBLY TO UPRIGHT POSITION.
B. CONNECT BACK (C) TO RIGHT ARM (A) AND LEFT ARM (B)
WITH FLAT WASHER (K) AND MEDIUM BOLT (H) USING ALLEN
WRENCH (L). DO NOT TIGHTEN COMPLETELY.
C. CONNECT BACK (C) TO SEAT (D) WITH FLAT WASHER (K) AND
SHORT BOLT (G) USING ALLEN WRENCH (L). DO NOT TIGHTEN
COMPLETELY.
STEP 3
A. GENTLY TIP CHAIR FORWARD TO FLOOR.
B. ATTACH LONG ARM OF GLIDER SUPPORT GLIDER (F) TO
BOTTOM OF RIGHT ARM (A) WITH FLAT WASHER (J), FLAT
WASHER (K) AND LONG BOLT (I) USING WRENCH (L). DO NOT
TIGHTEN COMPLETELY.
C. REPEAT TO ATTACH GLIDER (F) TO LEFT ARM (B), DO NOT
TIGHTEN COMPLETELY.
WEIGHT LIMIT
500 LBS
CARE AND CLEANING
IN ORDER TO PROLONG THE LIFE OF YOUR GLIDER,
STEP 4
A. ATTACH BASE (E) TO SHORT ARM OF GLIDER SUPPORT
ON GLIDER (F) WITH FLAT WASHER (K), FLAT WASHER (J)
AND LONG BOLT (I) USING ALLEN WRENCH (L).
STEP 5
A. TURN GLIDER TO UPRIGHT POSITION SO THAT IT STANDS
SQUARELY ON THE FLOOR.
B. TIGHTEN ALL BOLTS SECURELY USING ALLEN WRENCH (L).
C. RETAIN ALLEN WRENCH (L) FOR USE TO TIGHTEN BOLTS
PERIODICALLY OR AS NEEDED.
STEP 6
A. PUT SEAT CUSHION (N) WITH BANDAGE TIES ON THE SEAT,
THEN PUT ON THE BACK CUSHIONS.
PLEASE STORE IN DRY SHELTERED PLACE W HEN NOT IN USE O R DURING I NCLEMENT W EATHER.
