PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
1
3
2
4
A1 x 2
A2 x 2
B x 1
C x 2
D x 3
Ex 2
F x 2
G x 10
H x 1
During installation, parts A are placed in opposite
directions on both sides. When placing A, the side
with the large hole faces outward.
As shown in the figure, pass the longest rod B
through the bottom shelf installed in step 1.
Note: When attach the bottom shelf to the frame,
the rod B is connected to the A2 (two holes at the
farthest distance) as shown in step two. Then
connect rod C to A1. Secure the two sides of the
bottom shelf with screws G.
