PRODUCT ASSEMBLY
PRODUCT ASSEMBLY
04
05
MASSAGE CHAIR
READ ALL INSTRUCTIONS
BE
FORE USING THE ITEM
PRODUCT FEATURE
2
Vibration Motors
8 Massaging modes
Adjustableintensity
One
massage zones
The default timing is 15-30 min
HOW TO USE
1
、
Insert adapter jack into the socket found on back of the massage
cushion, then plug the adapter into a wall outlet(see Figure A)
Figure A
2
、
Turn the unit ON by pressing the POWER button once, The LED
will illuminate when power is on.
3
、
Turn on the massage in each zone by pressing the Massage zone.
LEDs will illuminate when each zone is activated. To turn off a
zone, press the button again.
4
、
To choose a desired massage mode, press the MODE button. To
change modes, press MODE button until LED for desired mode
illuminates
5
、
To change the massage intensity press the INTENSITY button. The
LED for HIGH or LOW intensities will illuminate when chosen.
NOTE
：
Discontinue use immediately if you feel any discomfort or
pain.
6
、
NOTE: for your benefit, the massage chair is equipped with an
auto shut-off feature that will turn the chair unit off after 30
minutes of continuous use.
7
、
DO NOT use for more than 30 minutes of continuous use.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
1
、
This product is for use on a 12V circuit Make sure that the product
