5. Maintenance.
● This product should be maintained by qualified persons, users are prohibited
to disassemble or maintain by themselves.
● Please do not forget to cut the power after usage.
● Please do not use this product if the socket looses.
● If this product will be left unused for long, please curl up the wires and reserve
this product in dry and dustless environment.
● Please do not reserve this product under high temperature or near fire and
avoid longtime direct sunshine.
● If the detachable cord / supply cord is damaged, it must be replaced by
qualified persons in order to avoid a Hazard.
● Please clean this product by dry cloth. do not use thinner, benzene or alcohol.
● The mechanical components of this product are specially designed and made,
it is not necessary to be specially maintained.
● Please do not use angular objects to thrust this product.
● Please do not roll or pull this product above uneven ground, it should be lifted
before moving.
● Please use it intermittently; please do not make this product work continuously
for long.
6. Solution of ordinary malfunctions.
● It is natural movement voice if the motor sounds while in usage.
● If the controller can’t work normally, please check the plug and socket if they
are connected strongly and make sure the switch is turned on.
● If the rated working time is over, the product will automatically activate the
power-off button; If this product works continuously for long, the temperature
protector will make the product automatically power-off, it should be used again
after half an hour's rest.
7. Storing conditions
● Storage room temperature -5 °C ~ 35 °C (23
℉
~95
℉
).
● Relative humidity 20% to 80%, no corrosive gas and well ventilated room.
06
Summary of Contents for JL10003
Page 25: ......
