Installation site
Make sure there is enough space for the massage chair to tilt.
Cushion
The area where the seat frame touches the floor.
● Do not expose the massage chair to direct sunlight or high temperature environments
(such as before heating equipment), because this may cause the massage chair's synthetic
leather to fade or harden.
● To avoid damage to the floor, place a mat under the machine. When tiling the mat,
the size of the mat should be large enough to cover the area where the base frame of
the machine touches the floor (at least 35.5” x 21”/90 x 53 cm), as shown in the picture.
● The machine should be installed close to the power outlet.
Installation
Grounding description
This machine must be grounded.
* This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
* This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
* Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
* This product has a grounding plug, make sure that the product is connected to an outlet having the same
configuration as the plug.
* No adapter should be used with this product.
* If the power cord is damaged, it must be replaced with a dedicated power cord or a dedicated component
purchased from its manufacturer or maintenance department.
* The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance.
Attention
11
