Product moving instructions
Method 1:Hold both sides of the handrail, then lift and move.
● Since this machine is heavy, please be careful
when carrying it to avoid back strain.
(This method must be carried by two or more people)
Weight
About 128LBS / 58KG
※
Attention
1, Please lift the massage chair to move on the
vulnerable ground such as wooden floor.
2, Please reach under the armrest to support the
armrest while lifting it.
Place the unit on the floor
● Put down the machine slowly, taking care not to
injure your feet.
● Do not let go of the machine until the machine
is completely flat. If you suddenly let go,
it may cause damage to the machine.
● The floor may be damaged, therefore, it is
recommended to lay mats and other items on
the floor.
Attention
• Do not drag or push the machine when
it is not fully installed.
• To move the machine on casters after use,
it is recommended to lay a mat under the moving
position to avoid scratches on the floor.
• Do not move the unit when someone is seated.
Otherwise, it may cause the unit to malfunction
or personal injury due to a fall.
• Please turn off the machine before moving the
machine and make sure that the backrest and feet
are fully reset.
Otherwise, it may cause malfunction of the unit or
personal injury.
Method 2:Use the rear casters to move the massage chair
Attention
If you use the rear casters to move the unit,
please put a cushion on the floor,
otherwise it may leave scratches on the floor.
1,Press the standby button " " on the control
panel to turn off all functions.
2, Reset the machine to its original position.
Press the power switch on the lower back of the machine
to "O" (off) position, unplug the power plug.
• As shown in the figure, tilt the chair down and back about 45
degrees to move it.
Note: Please don't push it down too far to avoid the chair from
being completely overturned and causing damage to the hood.
12
