Clean & Maintenance
Clean synthetic leather parts
Clean plastic part
1. Soak the soft cloth in water or hot water with neutral
detergent, wring it out, and and wipe the plastic
part of the machine.
* Do not use chemicals such as thinner, gasoline,
alcohol and so on to clean the machine.
2. Wipe with a cloth soaked in water and
thoroughly wrung out.
* Be sure to wring out the cloth before
wiping the control panel.
3. Let it air dry.
Wipe the leather with a soft, dry cloth.
1. Do not use chemicals such as thinner, gasoline, alcohol and so
on to clean the machine.
2. Please follow the instructions when using commercially available
leather care products (rag).
3. If the synthetic leather is particularly dirty, wipe it as follows.
①
Dip a soft cloth in water or hot water with 3% to 5% neutral detergent,
and then squeeze it out thoroughly.
②
Use the soft cloth to wipe the leather surface.
③
Wipe off the cleaning fluid with a cloth that has been soaked in
water and wrung out thoroughly.
④
Use a soft cloth to wipe dry.
⑤
Let it air dry naturally.
4. If stains are difficult to remove, please soak commercially
purchased melamine foam in neutral detergent, then wipe
the unit with it.
5. Do not use a hair dryer to dry surfaces.
6. Since the color of the cloth will stain the surface of the
synthetic leather, cattle are used.
Be careful when wiping the machine with cloth and colored cloth.
7. Do not keep these areas in contact with plastic for long periods of time,
as this will cause discoloration.
8. Synthetic leather has the potential to change color, so please contact it when
using hair dye covered with a towel.
gasoline
alcohol
chemicals
21
