background image

8

www.costway.com

9

Welcome to visit our website and purchase our quality products!

Reward Points

Exclusive Customer Service

Personalized Recommendations

Permanent Shopping Cart

Order History

We would like to extend our heartfelt thanks to 
all of our customers for taking time to assemble 
this product and giving us valuable feedbacks.

www.costway.com

Your suggestions and comments for COSTWAY are really important to us! 

We sincerely solicit you to go back to our shop and leave a good rating in just a 

simple click. It would be quite encouraging if you could kindly do so like below:

February 24, 2019

Great products so far. Fast delivery, easy setup, and working without any issues. 

Great products so far

With your inspiring rating, COSTWAY will be more consistent to offer you 

EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich

www.costway.com

3. As shown in figure D6 and D7: the tightness of the brake can be adjusted 

by adjusting the handlebar position nut and the brake nut.

4. When the sleeve inside the 8-inch wheel assembly is not centered, a 

screwdriver or hexagon wrench can be used to make it concentric with the 

bearing and then M8 screw can be used to tighten and fix it, as shown in 

figure D8/D9/D10.

. Product Maintenance and Maintenance Methods:

1.Do not let hard objects scratch the surface of the product to prevent damage 

to the material.

2.Use neutral synthetic detergent for daily cleaning and maintenance, wipe 

with wet cloth, then wipe with dry cloth.

3.Do not contact with strong acid or alkali to prevent corrosion.

4.The product shall not exceed the maximum load bearing during use.

5.Please check the tire wear regularly. If wear is serious, please change the 

tire in time

. Storage Conditions and Methods

After packaging, the knee walker-scooter shall be stored at a temperature not 

exceeding -10 

 ~ 40 

 and a relative humidity not exceeding 80%. With 

non-corrosive gas and in a well-ventilated clean room. Transport should be 

moisture-proof, avoid light, and away from heat sources. In case of any 

discrepancy between the original and the illustration, the original shall prevail.

Reviews: