2
3
4
1
6
8
7
5
Attach the Steering Column
│
5
5. Use a screwdriver to loosen the screw on the
battery cover
located in the center of the
steering wheel.
Front Bottom View
Turn the vehicle body on its side.
1. Fit a
Ø10 washer
onto the straight end of the steering column.
2. Insert the
straight end of steering column
up through the
hole on the steering driver
from bottom side, and out through the
hole on the dash.
3. Make sure the
bent end of
the steering column inserted into the hole on front axle
linkage. And fit a
Ø10 washer
onto the bent end of the steering column.
4. Fit a
snap ring
into the groove on the bent end of the steering column.
6. Remove the
battery cover
from the
top of the
battery compartment.
7. Insert 2x1.5
AA batteries (Not
included)
in their correct polarities.
Refer to the battery information
section.
8. Replace the
battery cover
.
07
Summary of Contents for TQ10025
Page 1: ...Toddler Ride On Scooter TQ10025 ...
Page 5: ...1 7 9 9 5 4 3 6 2 10 8 8 Parts Diagram 3 05 ...
Page 13: ......