Use the Remote Control
Operation manual: frequency binding is required for the first use (or after replacing
the battery).
1. Take out the remote control, lift the battery compartment door on the back of the
controller and insert two AAA batteries. install the battery
2. Long press on the frequency key(M) 2-4 seconds, Low speed LED light flashing
3. Turn on the power of the car, if the low-speed LED light keeps flashing until it stays
on, then the frequency binding is successful.
4. If the frequency binding failed (Low speed LED light flashing) , remove the battery
and repeat steps 1~3
5. If the remote control is not operated for 10 seconds, the indicator light will go out
and enter the power saving mode.
6. Button Description:
△
forward
▽
backward
◁
turn left
▷
turn right S: Speed ,
P: emergency brake, press it and the running function will fail, press again, it
r
will
will
elease.
NOTE: This remote control has energy saving mode. No operation for about 10
seconds, lights off and remot
to
e control
shut off . When you need
use
remote control, please press on any button ,it will work again.
/
/
Only adults are allowed
to use the remote
control, and children are
not allowed to touch it.
WARNING!
20
