4
ENG
LI
SH
4. Do not saw freehand. Make sure that the workpiece is firmly secured against the fence before you start
sawing. If the workpiece that you are sawing requires you to have one hand as close as 10 cm from the
blade, fix the workpiece to the table using a clamp, etc. before sawing.
5.
Warning:
Keep hands away from the saw blade. Never saw small objects. Use a push-stick.
6. Check that the blade is well-centred, sharp and that it rotates freely and without vibration.
7. Let the motor come up to speed before starting to cut.
8. Always keep the motor’s ventilation openings free of dust and debris.
9. Make sure that all clamps are tight before starting to saw, even if the table is locked at a fixed angle.
10. Make sure that the blade and flanges are clean and that the spindle nut is tight. Use only the blade
flanges belonging to your saw.
12. Use only saw blades having a diameter and speed rating complying with those in the technical
specifications.
13. When sawing long objects, make sure that the ends are adequately supported.
14. Always check the blade for cracks and fractures before using it. Replace a damaged blade immediately.
15. Do not use the saw if any of the parts is missing, damaged or not working properly. Unplug the saw if
it starts to make strange noises or vibrate. Get a professional to replace the missing or damaged part
before you use the saw again.
16. Never use the saw if the blade guard is not in place and working properly.
17. Never stretch round or over the blade when it is rotating. Maintain a steady stance and remain balanced
at all times.
18. Make sure that the blade can rotate freely (especially after transportation/blade changes) before plugging
in and starting the saw.
19. Never lock the switch in the ON position.
21.
Important:
When the workpiece has been completely sawn through: Turn the machine off and wait until
the blade has stopped rotating before lifting the saw head.
22. Turn the machine off and wait until the blade has stopped before moving the workpiece or adjusting any
setting.
23. Do not remove any offcuts or jammed material from around the blade area until the blade has stopped.
24. Never saw into ferrous metals, brick or mortar.
25. Never use the saw near flammable fluids or gas.
26. Never clean the plastic parts of the saw using solvents. Solvents can dissolve or otherwise damage
plastic; use a soft, moist cloth only.
27. Unplug and clean the saw before leaving it. Always tidy the work area when you have finished working.
28. Keep this instruction manual safe. Read through it regularly and use it to help instruct other users.
Make sure that everyone using the saw has read these instructions.
29. Do not expose the saw to rain and do not use it in humid environments.
30. Ensure that the work area is well-lit.
31. Wear suitable clothing, loose clothing or jewellery can get caught in moving parts.
32. The saw must only be operated by persons over the age of 18; persons over the age of 16 may operate
the tool under supervision. Keep children away from the saw when it is connected to the power supply.
33. Keep the work area tidy, do not leave offcuts or waste material around the saw unnecessarily. Make sure
that all offcuts can be removed from the saw blade; otherwise they might be ejected by the blade.
34. Do not distract the operator of the saw.
35. Do not try to stop the blade by pushing something against the side of the blade when the power has
been turned off.
Summary of Contents for 2502W
Page 107: ......
