5
EN
G
LI
S
H
4. Functions
4.1 Re-setting
When the charger is connected to an electric socket it is automatically reset and
charging does not commence until you have started the charger manually.
4.2
<
14 Ah – Charge setting 1
Suitable for motorcycle batteries and other smaller batteries (14.4 V/0.8 A).
Setting 1 is to be used for batteries with a lower capacity than 14 Ah. Connect
the charging clamps to the battery (red to + and black to -), then press [ MODE ] to
select the desired function and start charging.
•
flashes. If you do not press any button
will light up and charging will
commence at 0.8 A (±10 %).
• If everything is OK
will light up during the entire charging cycle until the voltage
reaches 14.4 V (±0.25 V).
• When charging is complete
will switch off and
will be lit.
Charging will switch to conservation charging.
4.3
>
14 Ah – Charge setting 2
Suitable for car batteries, regular batteries etc. (14.4 V/4 A).
Setting 2 is to be used for batteries with a higher capacity than 14 Ah. Connect
the charging clamps to the battery (red to + and black to -), then press [ MODE ] to
select the desired function and start charging.
•
flashes. If you do not press [ MODE ] again
will light up and charging will
commence at 4 A (±10 %).
• If everything is OK
will light up during the entire charging cycle until the voltage
reaches 14.4 V (±0.25 V).
• When charging is complete
will switch off and
will be lit.
Charging will switch to maintenance charging.
4.4
COLD
– Charge setting 3
Suitable for large batteries or if charging commences at low temperatures (14.7 V/4 A).
Setting 3 is to be used for batteries with a much higher capacity than 14 Ah (or if com-
mences at low temperatures). Connect the charging clamps to the battery (red to +
and black to -), then press [ MODE ] to select the desired function and start charging.
• flashes. If you do not press
[ MODE ] again
will light up and charging will
commence at 4 A (±10 %).
• If everything is OK
will light up during the entire charging cycle until the voltage
reaches 14.7 V (±0.25 V).
• When charging is complete
will switch off and
will be lit.
Charging will switch to maintenance charging.
Summary of Contents for CB5-5L-BS1
Page 2: ......
