COTES C30
OPERATING AND SERVICE HANDBOOK
page 8/48
SECTION 2 / THE DEHUMIDIFIER
ABOUT THE COTES C30 RANGE OF DEHUMIDIFIERS
The Cotes C30 range of dehumidifiers is designed and configured for a wide range of industrial uses.
Prominent among these is humidity management in storage facilities and basement areas, in water
works and in many kinds of process industry in which stable, well-controlled air conditions are crucial.
C30E units are configured to minimise the overall energy consumption of the dehumidification
process. C30C units are specially designed to operate inside cold storage facilities.
The dehumidifiers in the C30 range are designed for easy cleaning, with configuration options that
include a heat recovery module or a condensation module and additional filters, if needed.
Design priorities
The Cotes C30 range features an eye-catching modern industrial design appearance, along with
exceptional reliability.
It is designed to ensure the unhindered passage of air through the unit, which reduces
•
energy consumption
•
pressure losses
•
noise levels
All the components, ancillary equipment and features are optimised for better performance,
exceptional service life and ease of maintenance.
Capacities
The Cotes C30 range currently features models with nominal air volumes of 300 m
3
/hour.
At process air inlet conditions of 20°C and 60% relative humidity (%RH), the capacities (the amount
of water which can be removed from the air) of these units are between 0.9 kg/hour and 1.9 kg/hour.
At process air inlet conditions from -25
°C to -18°C and 95% relative humidity (%RH), the capacities
(the amount of water which can be removed from the air) of these units are between 0.15 kg/hour
and 0.3 kg/hour.
