Cotterman KNOCKED-DOWN LADDER Series Assembly Download

Page: 3 / 3

A0470118revG.doc ©Copyright

Cotterman

Co. 2007

3 OF3

STEP 9 - COMPLETION

STAND LADDER UPRIGHT AS SHOWN

(DRAWING D).

ACTIVATE SAFELOCK BY STEPPING ON TRIP

BAR, LOCATED IN FRONT OF FIRST STEP. THIS SETS THE LADDER ON THE RUBBER BUMPERS TO
LEVEL

YOU MAY NOW TIGHTEN ALL BOLTS INSTALLED

.DO NOT PROCEED UNTIL LADDER IS STABLE!

QUESTIONS OR INQUIRIES SHOULD BE DIRECTED TO:

COTTERMAN COMPANY

P.O. BOX 168

CROSWELL, MICHIGAN 48422

PHONE: (810) 679-4400

FAX: (810) 679-4510

E-MAIL: info@cotterman.com

Summary of Contents for KNOCKED-DOWN LADDER Series

Page 1: ...P THE LADDER NEVER ASSEMBLE THE LADDER ALONE STEP 1 INSTALL HANDRAILS UNPACKAGE AND SORT ALL COMPONENTS START BY PLACING THE LADDER STILE ON THE FLOOR WITH THE STILES FACING UPWARD SLIP THE HANDRAILS...

Page 2: ...LES ARE AT THE TOP USING 6 3 8 16 x 1 HEX HEAD CAP SCREWS LOCKNUTS BOLT THE TOP OF BACK PANEL C TO THE TOP PLATFORM BRACKET SEE DRAWING C BOLT THE BOTTOM OF BACK PANEL C TO BASE PANEL E ON THE INSIDE...

Page 3: ...NG ON TRIP BAR LOCATED IN FRONT OF FIRST STEP THIS SETS THE LADDER ON THE RUBBER BUMPERS TO LEVEL YOU MAY NOW TIGHTEN ALL BOLTS INSTALLED DO NOT PROCEED UNTIL LADDER IS STABLE QUESTIONS OR INQUIRIES S...