DYNA-CUT
4
SAFETY PROCEDURES
BEFORE USE:
•
Read through the owner’s manual. Follow instructions CAREFULLY
.
•
NEVER use a wet area. Electric shock could occur.
•
Use a GROUNDED outlet and a GROUNDED circuit. Do not use
undergrounded equipment on the same circuit.
•
Always use a dedicated line. DO NOT use with line splitting surge
protector.
DURING USE:
•
Keep fingers and hands away from all rotating parts.
•
Keep cords clear of moving parts.
AFTER USE:
•
Turn off machine at the power switch, then unplug the main
power cord. This will prevent damage to your machine by
power/voltage spikes.
•
To unplug cords, always grasp the plug body, never pull on cords
to disconnect. Wire fatigue and possible shock could results from
improper disconnect procedures.
BE ALERT! BE CAREFUL!
