13
There are 2 different calipers the o-ring and the metal caliper. The metal caliper is
designed to work better with heavy stock and the oring caliper is designed to work with
lighter stocks. Use the oring caliper when running any multipart forms.
LOADING THE FEEDER
Take the paper and load the feed tray. DO NOT OVER LOAD. The weight and size for
the stock you are running will determine how much can be loaded in the feed rails. The
paper should sit snug between the caliper and back stop. Do not pinch the paper as it
will affect the feeding consistency.
FEEDING NOTES
•
When set properly, the feed is very efficient and flexible. When neglected it can
become very frustrating to run even the simplest job. The adjustments
previously discussed are very important.
•
The Perfmaster Air V2 is capable of running 20lb. single sheets, 4 part forms and
100 lb cover. It is also very capable of handling gloss, coated, and even
laminated stocks. Its flexibility is directly related to the operator’s experience.
•
All carbonless sets are fed into the Perfmaster Air V2 with as little air pressure as
possible. Use just enough pressure to pull a single multi part form.
