19
TROUBLE SHOOTING
•
POWER DOES NOT TURN ON
1. Check fuse on side cover.
2. Check outlet for power.
•
FEED TABLE NOT FEEDING CORRECTLY
1. Check Caliper Adjustment.
2. Feed wheels do not have equal pressure on them, check adjustment.
3. Check pulse sensor alignment.
•
SHEETS NOT FEEDING STRAIGHT
1. Unequal feed wheel pressure.
2. Align feed rails “check for squareness”. This can be checked by the lead edge
of the paper feeding into the machine should line up with the front edge of the
feed plate.
3. Not enough pressure on forwarding rollers.
4. Clean ALL rubber rollers.
•
PERF IS NOT STRAIGHT
1. Check for equal pressure on all grip wheels and that none are hanging up.
2. Recheck all steps under (SHEET NOT FEEDING STRAIGHT)
•
PERFORATION IS NOT CLEAN OR CUTS SHEETS
1. Not enough pressure on perf wheel.
2. Perf blade is worn.
