3
SPECIFICATIONS
Net Weight:
PERFMASTER
DASH.........................................................6
0 lbs
Overall Dimensions: …………………………………………………………………..
41
”Lx
30
”Wx
19
”
H
Boxed Dimensions: …………………………………………………………………
32
”Lx
35
”Wx
25
”H
Min. Sheet Size:
………………………………………………………………..3”x5”
Max. Sheet Size:
…………………………………………………………………18”x20”
NOTE: The Perfmaster
Dash
is capable of handling many types of applications above
and beyond the standard specifications. It is possible to feed quite a variety of jobs,
from 30” sheets to die cut stocks. However, the performance of the Perfmaster
Dash
on these special applications is directly related to the experience of the operator.
SAFETY PROCEDURES
BEFORE USE:
•
Read through the owner’s manual. Follow instructions CAREFULLY.
DURING USE:
•
Keep fingers and hands away from score blades, perf blades, and rubber
rollers.
BE ALERT! BE CAREFUL!
CARE AND MAINTENANCE
The PERFMASTER
DASH
is a precision machine. It is very important to keep it free of
excessive dust, dirt and foreign matter. We recommend that you keep the machine
covered
when not in use.
BEARINGS/BUSHINGS: The bearings are sealed roller bearings and are designed to
be self lubricating, however dirt and dust can get into them causing clogging and dirt
build up. It is recommended to oil them daily under heavy use or monthly under light
use. The Bushings are Bronze and do require lubrication more frequently. Oil these
once a week under heavy use.
RUBBER ROLLERS: These tend to harden when exposed, and in use, use “water to
clean them before and after each use. This will increase the life and require less
replacement. “Do not use Blanket Wash or Other Cleaners.”
REMOVEABLE SCREWS: When these show signs of wear or stripping, replace as soon
as possible. If these strip or hollow out they can be costly to remove. If you do keep
your Perfmaster
DASH
clean and in top condition, it will give you years of service.
