manualshive.com logo in svg

COUNTRY FLAME TECHNOLOGIES CF-04, Installation, Operation And Maintenance Manual

The COUNTRY FLAME TECHNOLOGIES CF-04 is a high-quality heating system designed to bring warmth and comfort to your home. Ensure a seamless experience with our comprehensive Installation, Operation and Maintenance Manual. Download this essential manual for free from 88.208.23.73:8080 and effortlessly navigate through all aspects of using and maintaining your CF-04.

Share
Download
background image

Version 

4.0 

    

6

 

 

 

 

 

 

 

 

 

 

TABLE OF CONTENTS 

 

SAFETY NOTES.........................................................................................................................................2

 

EPA STANDARDS ..................................................................................................................................4

 

LISTING/TESTING AGENCY ................................................................................................................4

 

CERTIFICATION SAFETY LABEL (sample) .......................................................................................5

 

TABLE OF CONTENTS............................................................................................................................6

 

FORWARD..................................................................................................................................................8

 

COUNTRY FLAME .................................................................................................................................8

 

CROSSFIRE LIMITED WARRANTY ......................................................

Error! Bookmark not defined.

 

CROSSFIRE LIMITED WARRANTY (continued)..................................

Error! Bookmark not defined.

 

THE CROSSFIRE OPERATION ...........................................................................................................12

 

FEATURES.............................................................................................................................................12

 

SAFETY FEATURES.............................................................................................................................13

 

BATTERY BACKUP SYSTEMS ..........................................................................................................13

 

FUEL REQUIREMENTS .......................................................................................................................14

 

CROSSFIRE STARTUP.........................................................................................................................15

 

ASH REMOVAL ....................................................................................................................................18

 

Intelli-Choice

 CONTROL BOARD ........................................................................................................18

 

    CONTROL BOARD FACE ILLUSTRATION ………………………………………………………..20 
    CONTROL BOARD TROUBLESHOOTING CODES………………………………………………..23 
    STOVE ELECTRICAL DIAGRAM …………………………………………………………………..25 

STOVE SPECIFICATIONS ...................................................................................................................26

 

ELECTRICAL REQUIREMENTS.........................................................................................................26

 

GOLD DOOR CARE..............................................................................................................................26

 

OPTIONAL FEATURES........................................................................................................................26

 

OPTIONAL THERMOSTAT OPERATION..........................................................................................26

 

CROSSFIRE IS COLD .......................................................................................................................26

 

CROSSFIRE IS HOT..........................................................................................................................26

 

CHANGE HEAT LEVEL (thermostat active) ....................................................................................26

 

CHANGE HEAT LEVEL (thermostat inactive).................................................................................27

 

COMBUSTION FRESH AIR CONTROL .............................................................................................27

 

INSTALLATION ......................................................................................................................................28

 

INSTALLATION PREPARATION .......................................................................................................28

 

STOVE CLEARANCES.........................................................................................................................28

 

SHROUD INSTALLATION...................................................................................................................29

 

CHIMNEY ..............................................................................................................................................30

 

FACTORY-BUILT CHIMNEY..............................................................................................................30

 

MASONRY BUILT CHIMNEY.............................................................................................................30

 

FLOOR PROTECTION REQUIREMENTS ..........................................................................................31

 

OUTSIDE AIR COMBUSTION.............................................................................................................32

 

MOBILE HOME INSTALLATION .......................................................................................................33

 

Summary of Contents for CF-04



























































Reviews:

No comments

Related manuals for CF-04

RAIS 800 Instructions For Installation, Use And Maintenance Manual preview
800
Brand: RAIS Pages: 32
Rayburn Heatranger 480GB Servicing Instructions preview
Heatranger 480GB
Brand: Rayburn Pages: 33
J. A. Roby ROBY2500 CUISINIERE Instruction Manual preview
ROBY2500 CUISINIERE
Brand: J. A. Roby Pages: 31
Clarke THAMES TRAVEL BARGE 6910115 User Manual preview
THAMES TRAVEL BARGE 6910115
Brand: Clarke Pages: 24
Whirlpool RJE-395P Use And Care Manual preview
RJE-395P
Brand: Whirlpool Pages: 16
Power Fist 8699795 User Manual preview
8699795
Brand: Power Fist Pages: 20
Esse MF125 Installation & User'S Instructions preview
MF125
Brand: Esse Pages: 6
Acquisitions BLOOMSBURY Installation & User'S Instructions preview
BLOOMSBURY
Brand: Acquisitions Pages: 10
Wickes 812 Installation And Operating Manual preview
812
Brand: Wickes Pages: 4
Golden Eagle ECONOMY SERIES 5040 Owner’S Instruction And Operation Manual preview
ECONOMY SERIES 5040
Brand: Golden Eagle Pages: 56
GHP Group Pleasant Hearth HWS-224172 Series Manual preview
Pleasant Hearth HWS-224172 Series
Brand: GHP Group Pages: 64
Royal RONDINE AIR Installation And Maintenance Manual preview
RONDINE AIR
Brand: Royal Pages: 160
J. A. Roby CUISINIERE Instruction Manual preview
CUISINIERE
Brand: J. A. Roby Pages: 33
KEDDY Christineberg Installation Instructions Manual preview
Christineberg
Brand: KEDDY Pages: 20
Univa U305-1 Instruction Manual preview
U305-1
Brand: Univa Pages: 24
Regency F33-LPG1 Owners & Installation preview
F33-LPG1
Brand: Regency Pages: 28
Regency C33-LP2 Owners & Installation Manual preview
C33-LP2
Brand: Regency Pages: 24
Napoleon EPA 1400 Installation And Operating Instructions Manual preview
EPA 1400
Brand: Napoleon Pages: 40

Brands by name

Popular brands

Load more brands