Version
2.0b
46
APPENDIX C: TECHNICAL SPECIFICATIONS
Fuel Type:
#2 Yellow Shelled Corn Fuel
Wood Pellet Fuel
Moisture Content: 14% or less (12% preferred)
A.P.F.I. residential fuel
Heat Content: 10,000 Btu/lb*
Heat Content: 8200 BTU/lb
Ash
Content:
3%
maximum Ash
Content:
1%
max
Bulk Density: 40 lb./cubic ft. min
Moisture Content: 8% max
Size:
1/4”
to
3/8”
diameter
1.5” long max
Fines: 1% max through 1/8
th
screen
Hopper Size:
75 pounds corn or 55 pounds wood pellets
Flue Size:
3” or 4” – dependent on the chimney height
Flue Type:
Type L or PL (
double wall vent)
Type L or PL (
single wall stainless steel liner)
Air Inlet:
1 1/2” Sch 40 Black Iron pipe
Auger Type:
1
1/8”
cup Auger Feed System
Controls:
Electronic Integrated Feed Rate/Blower Speed Controls
Electrical:
120 Volts, 3 Amperes, and 60 Hz
Measurements:
UNIT
BODY
HEIGHT
22.75”
HEIGHT
ON
PEDESTAL
33.75”
HEIGHT ON LEGS
31.25”
UNIT WIDTH (REAR)
25.5”
WIDTH
AT
WIDEST
POINT
30.75”
UNIT DEPTH
24.5”
Weight :
STOVE
WEIGHT 400
Clearances:
UNIT
TO
SIDEWALL
2”
UNIT TO BACKWALL
1”
UNIT
CORNER
TO
DIAGONAL
WALL
1”
TOP TO COMBUSTIBLE
8”
TOP
TO
CEILING
(Alcove)
8”
Shroud Measurements:
*BTU/lb can vary depending on the moisture content of the corn.
