3
1
P.02
Place the seat A on the carpet and attach the
front legs B to seat A, using bolts #1 with
washers# 5 & spring washers #6 by
hexagonal wrench #11 to tighten these two
parts, as shown in the diagram.
Put the back support E to the proper location of
the seat A, secure the screws #4 on the loose
leaf and fasten with Phillips head screw driver
#12, as shown in the diagram.
2
Attach the right part C to seat A and use bolts
#2 to fasten these two parts by hexagonal
wrench #11, repeat the same process to
assemble the left part D and seat A, as shown
in the diagram.
1
11
5
B
B
A
A
E
4
Attach the wheel #9 to the left part D, insert
the bolt #3 & washer #5 & plastic washer #7
& washer #5 & nut #8, then fix the nut #8
with Y wrench #10 and tighten by hexagonal
wrench #11, repeat the same process to
fasten the wheel #9 and right part C, as
shown in the diagram.
4
C
D
A
2
11
C
D
9
3 5
5 8
10
12
7
6
2
11
