background image

Please note the serial number of your fan, and write it on the back of this User’s Manual for future reference.

Model Numbers: CL-30P-DDF, CL-20F-DDF,

CL-24O-DDF, CL-30-DDF

User’s Manual and

Operating Instructions

950450280-12

This product meets and exceeds the requirements of OSHA 1910.212(a)(5), the standard which 
regulates electric fan blade safety, and is certified under UL# E234000, established and made 
effective April 10, 2003, and updated March 23, 2005, by Underwriters Laboratories, Inc

.

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT:

Read and understand all of the directions in this manual before assembling, 

starting, or servicing the fan. Improper use of this fan can cause serious injury. Keep this manual for
future reference.

For ventilating use only.  Do not use to exhaust hazardous chemicals or use near
any flammable liquids or gases as sparks from motor may ignite fumes. Never use

the fan in spaces which contain products such as gasoline, solvents, paint thinners, dust particles,
volatile or airborne combustibles, or any unknown chemicals.

WARNING

Distributed by: TRACTOR SUPPLY COMPANY  200 POWELL PLACE

BRENTWOOD, TN 37027

For customer support, call: 1-866-641-4540

Summary of Contents for CL-20F-DDF













Reviews: