33
ver.071217-2.10
iLEARN
System Manual
iLEARN Door Control Menu Screens
(continued)
4.1 Set Up Gate(s) -
(Yes or No) This menu item will restart the Car Gate “Learn” wizard to estab-
lish the FULL OPEN and FULL CLOSE position of the Car Gate.
4.2 Gate Travel -
Default = 96”. This is the distance the Car Gate travels from FULL OPEN to
FULL CLOSE.
4.3 Fast Speed -
Default = 100% (100% corresponds to 60Hz). This is the speed the car gate(s)
run before reaching the “Slowdown Distance”.
4.4 Slow Speed -
Default = 50% (50% corresponds to 30Hz). This is the speed the car gate(s)
run when in the “Slowdown Distance”
4.5 Creep Speed -
Default = 35%. (35% corresponds to 21Hz). This is the speed the car gate(s)
run when in the “Creep Distance”.
4.6 Slowdown Distance -
Default = 15.0”. This is the distance away from FULL OPEN or FULL
CLOSE where the Car Gate(s) speed will change from “Fast” to “Slow”, as set by the iLEARN.
4.7 Creep Distance -
Default = 3.0”. This is the distance way from FULL OPEN or FULL CLOSE
where the Car Gate(s) speed will change from “Slow” to “Creep”, as set by the iLEARN.
4.8 Overdrive Time -
Default = 1.0s. This is the amount of time the door motors run after the
doors reach FULL OPEN or FULL CLOSE.
4.9 Motor Parameters
-These are parameters to be adjusted ONLY at the factory. They include
Motor Minimum Frequency, Motor Minimum Amps, Motor Midpoint Frequency, Motor Midpoint
Amps, Motor Maximum Frequency, and Motor Maximum Amps. These parameters are protected
by a Passcode - Call COURION for additional information.
4.9.9 Light Curtain During Delay
-Default is OFF. When turned ON, it allows the Light Cur-
tain to be broken during the Warning Buzzer Delay without interrupting the Close Cycle.
4.9.10 CARE Bypass
-Default is OFF. When turned ON, the Light Curtain Reversing Bit from
the Gate iDRIVE.g is ignored IF the Car Gate is in the ALMOST FULL CLOSE position.
4.9.11 iLEM Open/Close
-Default is OFF. When turned ON, the iLEARN will get the car top
OPEN/CLOSE Button function from the iLEM.
4.9.12 Front Light Curtain Bypass
-Default is OFF. When turned ON, the Light Curtain
reverse bits from the iDRIVE.g are ignored by the iLEARN - Front Gate Light Curtain is effec-
tively TURNED OFF.
Summary of Contents for iDRIVE
