Seat
Seat
Back
Back
Back
Back
STOP
DON’T RETURN TO STORE!
Step 6:
Fasten another seat and back support
brace (#6) to the back of two seat
assemblies (#7) by using bolts (#14) and
washers (#17). See Fig. C.
Note:
Make sure the two arcs of the seat and
back support brace (#6) should be facing
outside.
Step 7:
Insert the left and right swing arms (#8
and #9) into the seat and back support
braces (#6). Fasten them by using bolts
(#14) and washers (#17).
See Fig. D and Fig. E.
Step 8:
Fasten the swing arm tubes (#10) to the
front hole of the swing arms (#8 and #9)
by using bolts (#13), washers (#17) and
plastic nuts (#18). Then fasten the swing
arm tubes (#10) to the back of the swing
arms (#8 and #9) by using bolts (#13),
washers (#17) and plastic nuts (#18).
See Fig. F.
PAGE 4 OF 6
Fig. E
Fig. D
Fig. C
Note:
The labels marked “L” and “R” on the
swing arms (#8 and #9) should coincide
with Fig. D to ensure proper assembly.
Fig. F
20
14
17
7
7
7
7
6
6
9
9
9
9
8
8
8
8
6
20
14
17
20
14
R
L
17
20
14
13
17
20
17
18
13
17
10
10
10
10
20
17
18
17
