PARTS LIST
PART
NO.
MATERIAL CODE
PART
Q’TY
PART
NO.
MATERIAL CODE
PART
Q’TY
1
8
9
10
11
12
2
3
4
5
1
2
4
1
1
2
12
24
12
12
1
1
6
7
TABLE TOP
LEG
SUPPORT
CENTRE CONNECTOR
CENTRE
CONNECTOR WITH RING
SCREW ST4.2*12
BOLT M6*60
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
HEX.KEY
WRENCH 6MM
NUT WRENCH 10&13MM
TGS83HS-CS01
TGS83HS-CS02
TGS83HS-CS03
17C01A0721091Y4
17FA05040301-Y4
18000C23001
18000337002
17KAA0201----Y4
17KAB1101----Y4
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS83HS-
WM
COURTYARD CREATIONS INC.
PAGE 1 OF 2
62TGS83HSY201
62TGS83HSY101
17C17A0403001Y4
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
!
!
You will need the following tools:
-Phillips Screwdriver (Not Included)
-Hex.Key Wrench (See Part #11)
-Nut Wrench (See Part #12)
Step 1:
Place the table top (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Insert the legs (#3) and the supports (#2) into the plastic
holders attached on the underside of the table top (#1)
rim. See Figure 1.
SERVICE CENTER TOLL FREE NO.
TEL: 1-877-539-7436
FAX: 1-877-539-7439
FIGURE 1
STOP
DON’T RETURN TO STORE!
